Manon and Abraxos · The flower

Inside your download

• Complete solid diorama and five fitted parts: Manon, Abraxos, two whole wings and rocky base
• Ten STL, with eight integrated D-profile pegs and four male/female fit coupons
• Complete and separated OBJ/MTL, GLB and packed Blender, with five 4K maps
• ES/EN guides and digital mesh, cavity and assembly validation

Print notes

281.80 × 236.36 × 200.00 mm (width × depth × assembled height), 200 mm tall. Complete solid edition or five fitted parts: Manon, Abraxos without wings, whole wing A, whole wing B and rocky base. The front flower remains with Abraxos. Eight integrated D-profile pegs, two per detachable figure/wing: 6 mm nominal diameter for the figures and 4.8 mm for the wings; 5 mm nominal projection, 0.20 mm radial/flat clearance and 0.35 mm depth allowance. Four matching male/female STL fit coupons. Scale every part together; scaling changes the clearances. Assemble Abraxos vertically into the base, then Manon diagonally from above/left, wing B diagonally from above/outside and wing A diagonally from above/behind. Remove in reverse order. Follow the supplied assembly coordinates and joint orientations; do not force the parts. Test the coupons first and glue the final assembly if desired. No internal cavities detected. STL/OBJ in millimeters; GLB/Blender in meters. Keep OBJ, MTL and Textures together. No supports or sliced files. Support wing tips, horns, hair/cape overhangs, hands, sword, tail, flower petals and undersides as needed for the chosen orientation. Use a calibrated printer/resin profile. No physical print or fit test.

Licence

Personal use only. Print and paint for yourself. No redistribution of files, resale of physical prints or commercial use.

Independent, unofficial fan art inspired by Throne of Glass · Sarah J. Maas. Digital files only; no physical figurine is shipped.